NAD

CI 940 Multi-Channel Amplifier

Finale a 4 canali 4x35w RMS su 8 ohm
Colori disponibili : Black
2 Ingressi stereo separati, 2 Uscite loopOut, 2 Possibilità di configurazione a ponte, 2x170w RMS 8 ohm. Possibilità montaggio rack

0

Prezzo su richiesta

Four channels of clean, low distortion power set up in two stereo zone configuration
35 W x 4 @ 8 Ohms; IHF dynamic power; peak output current 30A (0.1 Ohm); 90W x 2 @ 80 Ohms in Bridge Mode
Compact 2U rack height with rack ears
Phoenix speaker connection blocks
Detachable power cable for easy service and upgrades
Indicator lamps for each zone that show protection status and amplifier clipping
>95dBA referenced to 1W
Continuous Output Power
8 Ohms/4 Ohms
4 x 35W (ref. rated THD, 20Hz-20Hz, all channels driven)
8 Ohms Brigde Mode
2 x 70W
Rated THD (250mW to rated power, CCIF IMD, DIM 100)
≤0.03% (ref. 20Hz-20kHz)
IHF Dynamic Power
8 Ohms / 55W4 Ohms / 85W2 Ohms / 95W
Damping Factor
>180 (ref. 8 Ohms, 50Hz and 1kHz)
Input Sensitivity
270mV (ref. rated power)
Voltage Gain
35dB
Frequency Response
±0.2dB (ref. 20Hz-20kHz)
-3dB at 3Hz and 100kHz
Signal/Noise Ratio, A-Weighted
>95dBA (ref. 1W)
>110dB (ref. 35W)
Trigger
5-30V In (AC/DC)
-52dBV, 12V Out
Time to Automatic Standby (without signal at input sense mode)
Rated Power
270W (120V 60Hz, 230V 50Hz)
Idle Power
Standby Power
Dimensions (W x H x D)
483 x 105 x 323mm (19 1/16 x 4 3/16 x 12 3/4”)
Net Weight
6.96kg (15.35lb)
Shipping Weight
8.4kg (18.5lb)

Vuoi maggiori informazioni su promozioni e scontistiche?

Chiamaci ora al numero verde

800 669 819

Vuoi parlare con i nostri tecnici?

I tuoi dati saranno utilizzati solo per richiamarti e non saranno comunicati a terzi.